Postprocessing by Ferras, Fernandes and Nobrega

• contributor: L.L. Ferrás, C. Fernandes, J.M. Nóbrega
• affiliation: Institute for Polymers and Composites (i3N), University of Minho, Portugal
• contact: mnobrega@dep.uminho.pt
• OpenFOAM version: ???
• published under: CC BY-NC license ([https:// creativecommons.org/licenses creative commons licenses])

Go back to Day 2.

[https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-slides.pdf Postprocessing]

This [https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-slides.pdf pdf] will guide you through five cases and show you the postprocessing possibilities in the open source postprocessor Paraview. You will not run simulation, but rather take a look at already calculated results. Some of these cases you might already have or will run in other tutorials. The cases are:

• cavity
• 3D damBreak
• goldschmidt
• motorbike
• propeller

Here you can download the files:

• [https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-cavity.tar.gz cavity]
• [https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-damBreak3D.tar.gz 3D damBreak]
• [https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-goldschmidt.tar.gz goldschmidt]
• [https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-motorBike.tar.gz motorbike]
• [https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-propeller.tar.gz propeller]