Postprocessing by Ferras, Fernandes and Nobrega
Revision as of 06:39, 26 September 2016 by Jozsef Nagy (talk | contribs)
- contributor: L.L. Ferrás, C. Fernandes, J.M. Nóbrega
- affiliation: Institute for Polymers and Composites (i3N), University of Minho, Portugal
- contact: mnobrega@dep.uminho.pt
- OpenFOAM version: ???
- published under: CC BY-NC license ([https:// creativecommons.org/licenses creative commons licenses])
Go back to Day 2.
[https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-slides.pdf Postprocessing]
This [https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-slides.pdf pdf] will guide you through five cases and show you the postprocessing possibilities in the open source postprocessor Paraview. You will not run simulation, but rather take a look at already calculated results. Some of these cases you might already have or will run in other tutorials. The cases are:
- cavity
- 3D damBreak
- goldschmidt
- motorbike
- propeller
Here you can download the files:
- [https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-cavity.tar.gz cavity]
- [https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-damBreak3D.tar.gz 3D damBreak]
- [https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-goldschmidt.tar.gz goldschmidt]
- [https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-motorBike.tar.gz motorbike]
- [https:// github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/B3-propeller.tar.gz propeller]