Basics archive
Revision as of 12:05, 30 May 2023 by Jozsef Nagy (talk | contribs)
These tutorials are perfect for beginners. You can slowly take your first steps in OpenFOAM.
Go back to Archive section.
Basics
- First 3 OpenFOAM simulations - In this tutorial you will get a hands-on experience of the workflow of CFD simulations in OpenFOAM using three different cases (lid-driven cavity, pitzDaily & elbow).
- Cavity case revisited - Here you will be taken into the depth of an OpenFOAM case in order to understand all the important in- and outputs required for a CFD simulation in OpenFOAM.
- Basic Introduction to OpenFOAM - These pdfs will give you an excellent start into CFD with OpenFOAM.
- Hagen Poiseuille flow - Here you will find a basic tutorial on the Hagen Poiseuille flow.
- Introduction to OpenFOAM - Here you will find and introduction to OpenFOAM.
- Cavity case - The cavity case is one of the most basics tutorials. You will get a fast walkthrough with a good explanation about the mesh, running the case and postprocessing the results.
- Basics about OpenFOAM - Here you will find a video on the very basics, history and philosophy of OpenFOAM.
- Session A: Getting to know OpenFOAM - Here you can find a basic talk about OpenFOAM.
- Taylor Couette flow - In this short tutorial you will experience your first steady state simulation, where you can directly compare your results with experiments from literature.
