Collection of turbulence modeling
Revision as of 06:55, 11 April 2017 by Jozsef Nagy (talk | contribs)
Turbulence modeling is in several cases a very important topic in a simulation project. These tutorials explain, how you can utilize them in OpenFOAM.
Go back to Collection by topic.
Turbulence modeling
Theory
- Detailed theory on turbulence modeling - In this tutorial you find the basic theory of turbulence modeling.
- Difference between a laminar and a turbulent solver - This tutorial gives a compact explanation of a laminar solver as well as a turbulent solver and the difference between them.
- Steady-state turbulence modeling - Here you will find a basic 2D hands-on tutorial to understand the theory of steady-state turbulence modeling.
- Transient turbulence modeling - Here you will find a basic 2D hands-on tutorial to understand the theory of transient turbulence modeling.
Application cases
- Rearward facing step case - This tutorial describes the flow over a rearward facing step in detail.
- Flow around a car - Here you will learn about the flow around a car.
- Flow around a circular cylinder - 2D case - This tutorial describes the flow around a 2D circular cylinder.
- Flow around a square cylinder - 3D case - This tutorial describes the flow around a 3D square cylinder.
- Flow around a hemisphere - This tutorial gives you an extensive introduction to the flow around a hemisphere, which can be seen as one of the simplest case of an external flow.
Further reading
Publications
- S. Jakirlic, L. Kutej, P. Unterlechner and C. Tropea: Critical Assessment of Some Popular Scale-Resolving Turbulence Models for Vehicle Aerodynamics, SAE Int. J. Passeng. Cars - Mech. Syst., Volume 10(1), p. 235-250, 2017, doi:10.4271/2017-01-1532.
- M. Islam, F. Decker, E. de Villiers, A. Jackson, J. Gines, T. Grahs, A. Gitt–Gehrke and J. Comas i Font: Application of Detached–Eddy Simulation for Automotive Aerodynamics Development, SAE International, 2009-01-0333, 2009.