Difference between revisions of "Multiphase modeling"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
Line 14: | Line 14: | ||
* [https://wiki.openfoam.com/Bubble_rising_in_a_spiralling_path_in_a_large_tank_by_Lionel_Gamet '''Bubble rising in a spiralling path in a large tank'''] - In this tutorial you will learn about a spralling buble rising. | * [https://wiki.openfoam.com/Bubble_rising_in_a_spiralling_path_in_a_large_tank_by_Lionel_Gamet '''Bubble rising in a spiralling path in a large tank'''] - In this tutorial you will learn about a spralling buble rising. | ||
* [https://wiki.openfoam.com/The_stationary_droplet_by_Lionel_Gamet '''The stationary droplet'''] - In this tutorial you will learn about how to reduce the spurious currents appearing in VoF simulations. | * [https://wiki.openfoam.com/The_stationary_droplet_by_Lionel_Gamet '''The stationary droplet'''] - In this tutorial you will learn about how to reduce the spurious currents appearing in VoF simulations. | ||
+ | |||
+ | Check the [https://wiki.openfoam.com/Multiphase_modeling_archive '''Archive'''] section for more (however not fully up to date) multiphase tutorials. | ||
=Further reading= | =Further reading= |
Revision as of 12:36, 1 December 2022
Multiphase modeling is a challenging task. With these tutorials you will learn, how to model flows, where you have multiple phases.
Go back to Collection by topic.
Multiphase modeling
Intro and Overview
- Different models for multiphase flows - Hoste and Jasak provide a in-depth introduction into a variety of models for multiphase flows.
Volume of Fluid
- Volume-of-fluid method - dam break case - Nagy provides a walk through of the dam break tutorial. *
- Multiphase (VOF) simulation project - In this video series Nagy guides you through an entire simulation project for a multiphase (VOF) flow from the geometry over mesh set up and creation as well as case set up and running the simulation up until the evaluation of the results.
- Hysing benchmark - In this tutorial you will find a reference test case for VoF simulations. It is an elementary quantitative benchmark configuration with reference data in literature.
- Bubble rising in a spiralling path in a large tank - In this tutorial you will learn about a spralling buble rising.
- The stationary droplet - In this tutorial you will learn about how to reduce the spurious currents appearing in VoF simulations.
Check the Archive section for more (however not fully up to date) multiphase tutorials.
Further reading
Theses
- J. Nagy: Untersuchung von mehrphasigen, kompressiblen Strömungen durch Simulation und Experiment, PhD thesis, Technische Universität Wien, 2012.