Difference between revisions of "Multiphase modeling"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
| Line 14: | Line 14: | ||
* [https://wiki.openfoam.com/Bubble_rising_in_a_spiralling_path_in_a_large_tank_by_Lionel_Gamet '''Bubble rising in a spiralling path in a large tank'''] - In this tutorial you will learn about a spralling buble rising. | * [https://wiki.openfoam.com/Bubble_rising_in_a_spiralling_path_in_a_large_tank_by_Lionel_Gamet '''Bubble rising in a spiralling path in a large tank'''] - In this tutorial you will learn about a spralling buble rising. | ||
* [https://wiki.openfoam.com/The_stationary_droplet_by_Lionel_Gamet '''The stationary droplet'''] - In this tutorial you will learn about how to reduce the spurious currents appearing in VoF simulations. | * [https://wiki.openfoam.com/The_stationary_droplet_by_Lionel_Gamet '''The stationary droplet'''] - In this tutorial you will learn about how to reduce the spurious currents appearing in VoF simulations. | ||
| + | * [https://wiki.openfoam.com/Multiphase_modeling_(VOF)_by_Bahram_Haddadi '''Multiphase'''] - Use the interFoam solver to simulate breaking of a dam for 2s. | ||
Check the [https://wiki.openfoam.com/Multiphase_modeling_archive '''Archive'''] section for more (however not fully up to date) multiphase tutorials. | Check the [https://wiki.openfoam.com/Multiphase_modeling_archive '''Archive'''] section for more (however not fully up to date) multiphase tutorials. | ||
Latest revision as of 12:21, 30 May 2023
Multiphase modeling is a challenging task. With these tutorials you will learn, how to model flows, where you have multiple phases.
Go back to Collection by topic.
Multiphase modeling
Intro and Overview
- Different models for multiphase flows - Hoste and Jasak provide a in-depth introduction into a variety of models for multiphase flows.
Volume of Fluid
- Volume-of-fluid method - dam break case - Nagy provides a walk through of the dam break tutorial. *
- Multiphase (VOF) simulation project - In this video series Nagy guides you through an entire simulation project for a multiphase (VOF) flow from the geometry over mesh set up and creation as well as case set up and running the simulation up until the evaluation of the results.
- Hysing benchmark - In this tutorial you will find a reference test case for VoF simulations. It is an elementary quantitative benchmark configuration with reference data in literature.
- Bubble rising in a spiralling path in a large tank - In this tutorial you will learn about a spralling buble rising.
- The stationary droplet - In this tutorial you will learn about how to reduce the spurious currents appearing in VoF simulations.
- Multiphase - Use the interFoam solver to simulate breaking of a dam for 2s.
Check the Archive section for more (however not fully up to date) multiphase tutorials.
Further reading
Theses
- J. Nagy: Untersuchung von mehrphasigen, kompressiblen Strömungen durch Simulation und Experiment, PhD thesis, Technische Universität Wien, 2012.
