Collection of the basics
These tutorials are perfect for beginners. You can slowly take your first steps in OpenFOAM.
Go back to Collection by topic.
Basics
- Elbow case - In this tutorial you will get a first hands-on glimpse into the workflow of CFD simulations with OpenFOAM. The pdf version can be found here.
- Cavity case - The cavity case is one of the most basics tutorials. You will get a fast walkthrough with a good explanation about the mesh, running the case and postprocessing the results.
- Basics about OpenFOAM - Here you will find a video on the very basics, history and philosophy of OpenFOAM.
- Cavity case revisited - Here you will be taken into the depth of an OpenFOAM case in order to understand all the important in- and outputs required for a CFD simulation in OpenFOAM.
- Taylor Couette flow - In this short tutorial you will experience your first steady state simulation, where you can directly compare your results with experiments from literature.
- T-junction case - In this tutorial you will try a simple simulation with the your newly acquired knowledge on CFD in OpenFOAM.
- Introductory course - In these videos you will hear a detailed introduction to OpenFOAM by Professor Hrvoje Jasak.
- Simulation project of an exhaust manifold - These screencasts will guide you through an entire CFD simulation project with an exhaust manifold.
- Basic Introduction to OpenFOAM - These pdfs will give you an excellent start into CFD with OpenFOAM.
- Introduction to OpenFOAM - Here you will find and introduction to OpenFOAM.
- Running your first case on your own - Here you can test your knowledge on the basics of OpenFOAM by trying to run a case on your own.
- Hagen Poiseuille flow - Here you will find a basic tutorial on the Hagen Poiseuille flow.
- Basic case studies - Here you can find a selection of basic case studies.
- [* Drag coefficient of a monkey head - Here you learn how to calculate the drag coefficient of a body.