Meshing archive

The saying goes "Who owns the mesh, owns the solution". With the help of these tutorials you will learn how to create meshes for arbitrary geometries in order to run your simulations.

Go back to Archive section.

Meshing

Overview

Geometry

Meshing

• blockMesh - In the following tutorials you will find an introduction into meshing with the blockMesh utility:
  • Basics of blockMesh by Divyesh Variya (DD Fluids)
  • blockMesh by Bahram Haddadi
  • by Ferras

• snappyHexMesh – Single region - Mesh a flange geometry and simulate heat transfer in it using scalarTransportFoam.
• snappyHexMesh – Multi region - In this tutorial a geometry with more than one region is meshed using snappyHexMesh and simulated using chtMultiRegionFoam.
• How To Build a complete OpenFOAM Project - Exhaust manifold - In this tutorial you will learn about meshing in a full simulation project.
• snappyHexMesh - This tutorial gives you an insight on how to create complex meshes within OpenFOAM and snappyHexMesh.
• GMSH In this tutorial you will get a compact introduction into the work flow within the software GMSH for meshing.