Difference between revisions of "Collection of the basics"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) (→Basics) |
Jozsef Nagy (talk | contribs) |
||
| Line 8: | Line 8: | ||
* [https://wiki.openfoam.com/First_simulation_by_Bahram_Haddadi '''Basic case setup'''] - Using icoFoam solver, simulate 75 s of flow in an elbow. | * [https://wiki.openfoam.com/First_simulation_by_Bahram_Haddadi '''Basic case setup'''] - Using icoFoam solver, simulate 75 s of flow in an elbow. | ||
| − | |||
| − | |||
* [https://wiki.openfoam.com/index.php?title=Cavity_by_Joel_Guerrero '''Cavity case revisited'''] - Here you will be taken into the depth of an OpenFOAM case in order to understand all the important in- and outputs required for a CFD simulation in OpenFOAM. | * [https://wiki.openfoam.com/index.php?title=Cavity_by_Joel_Guerrero '''Cavity case revisited'''] - Here you will be taken into the depth of an OpenFOAM case in order to understand all the important in- and outputs required for a CFD simulation in OpenFOAM. | ||
| − | |||
| − | |||
* [https://wiki.openfoam.com/index.php?title=T-junction_by_Bahram_Haddadi_and_colleagues '''T-junction case'''] - In this tutorial you will try a simple simulation with the your newly acquired knowledge on CFD in OpenFOAM. | * [https://wiki.openfoam.com/index.php?title=T-junction_by_Bahram_Haddadi_and_colleagues '''T-junction case'''] - In this tutorial you will try a simple simulation with the your newly acquired knowledge on CFD in OpenFOAM. | ||
| Line 26: | Line 22: | ||
* [https://wiki.openfoam.com/Hagen_Poiseuille_by_Joel_Guerrero '''Hagen Poiseuille flow'''] - Here you will find a basic tutorial on the Hagen Poiseuille flow. | * [https://wiki.openfoam.com/Hagen_Poiseuille_by_Joel_Guerrero '''Hagen Poiseuille flow'''] - Here you will find a basic tutorial on the Hagen Poiseuille flow. | ||
| − | |||
| − | |||
=Further reading= | =Further reading= | ||
Revision as of 05:31, 18 December 2020
These tutorials are perfect for beginners. You can slowly take your first steps in OpenFOAM.
Go back to Collection by topic.
Basics
- Elbow case - In this tutorial you will get a first hands-on glimpse into the workflow of CFD simulations with OpenFOAM.
- Basic case setup - Using icoFoam solver, simulate 75 s of flow in an elbow.
- Cavity case revisited - Here you will be taken into the depth of an OpenFOAM case in order to understand all the important in- and outputs required for a CFD simulation in OpenFOAM.
- T-junction case - In this tutorial you will try a simple simulation with the your newly acquired knowledge on CFD in OpenFOAM.
- Introductory course - In these videos you will hear a detailed introduction to OpenFOAM by Professor Hrvoje Jasak.
- Basic Introduction to OpenFOAM - These pdfs will give you an excellent start into CFD with OpenFOAM.
- Running your first case on your own - Here you can test your knowledge on the basics of OpenFOAM by trying to run a case on your own.
- Discretization – Part 2 - Use the scalarTransportFoam solver, do simulate the movement of a circular scalar spot region at the middle of a 100 × 100 cell mesh (10 m × 10 m), then move it to the right, to the top and diagonally.
- Hagen Poiseuille flow - Here you will find a basic tutorial on the Hagen Poiseuille flow.
