Difference between revisions of "Postprocessing archive"
Jump to navigation
Jump to search
Stefan Radl (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
Line 6: | Line 6: | ||
* [https://wiki.openfoam.com/Swak4Foam_and_PyFoam_by_Bruno_Santos '''swak4Foam and pyFoam'''] - This tutorial provides material on how to use swak4Foam and pyFoam to postprocess data. | * [https://wiki.openfoam.com/Swak4Foam_and_PyFoam_by_Bruno_Santos '''swak4Foam and pyFoam'''] - This tutorial provides material on how to use swak4Foam and pyFoam to postprocess data. | ||
+ | |||
+ | * [https://wiki.openfoam.com/Post-Processing_in_ParaView_&_OpenFOAM_by_Divyesh_Variya_(DD_Fluids) '''Post- processing by Divyesh Variya (DD Fluids)'''] - In these video tutorials, you will get a hands on experience on OpenFOAM functions, paraview & gnuplot post-processing. | ||
+ | |||
+ | * [https://wiki.openfoam.com/Postprocessing_by_Ferras,_Fernandes_and_Nobrega '''Post- processing with five example cases'''] - Ferras et al. provide 5 cases and guide through the postrpocessing with gnuplot and ParaView. | ||
+ | |||
+ | * [https://wiki.openfoam.com/Sampling_by_Bahram_Haddadi_and_colleagues '''Sampling'''] - Simulate the flow along a shock tube for 0.007 s and use OpenFOAM sampling utility for extracting the data along a line during the simulation and after the simulation. | ||
+ | |||
+ | * [https://wiki.openfoam.com/Session_B_by_Stefan_Radl '''Session B: Using OpenFOAM'''] - Here you will find information about sampling and probing (see sub-section [https://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/1_SessionAB_BasicTraining/2018-02-20_Session_B_part_6_x_samplingProbing.mp4 '''Sampling and Probing''']), as well as get a basic introduction to visualization (see sub-section [https://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/1_SessionAB_BasicTraining/2018-02-20_Session_B_part_7_x_visualizationBasics.mp4 '''Visualization 0.1''']). |
Revision as of 09:35, 30 November 2022
Simulation results are good and nice. However, you will have to visualize to data you get out of a simulation in OpenFOAM. These tutorials will explain, how to evaluate simulation results in OpenFOAM.
Go back to Archive section.
Post-processing
- swak4Foam and pyFoam - This tutorial provides material on how to use swak4Foam and pyFoam to postprocess data.
- Post- processing by Divyesh Variya (DD Fluids) - In these video tutorials, you will get a hands on experience on OpenFOAM functions, paraview & gnuplot post-processing.
- Post- processing with five example cases - Ferras et al. provide 5 cases and guide through the postrpocessing with gnuplot and ParaView.
- Sampling - Simulate the flow along a shock tube for 0.007 s and use OpenFOAM sampling utility for extracting the data along a line during the simulation and after the simulation.
- Session B: Using OpenFOAM - Here you will find information about sampling and probing (see sub-section Sampling and Probing), as well as get a basic introduction to visualization (see sub-section Visualization 0.1).