Postprocessing archive
Revision as of 09:35, 30 November 2022 by Jozsef Nagy (talk | contribs)
Simulation results are good and nice. However, you will have to visualize to data you get out of a simulation in OpenFOAM. These tutorials will explain, how to evaluate simulation results in OpenFOAM.
Go back to Archive section.
Post-processing
- swak4Foam and pyFoam - This tutorial provides material on how to use swak4Foam and pyFoam to postprocess data.
- Post- processing by Divyesh Variya (DD Fluids) - In these video tutorials, you will get a hands on experience on OpenFOAM functions, paraview & gnuplot post-processing.
- Post- processing with five example cases - Ferras et al. provide 5 cases and guide through the postrpocessing with gnuplot and ParaView.
- Sampling - Simulate the flow along a shock tube for 0.007 s and use OpenFOAM sampling utility for extracting the data along a line during the simulation and after the simulation.
- Session B: Using OpenFOAM - Here you will find information about sampling and probing (see sub-section Sampling and Probing), as well as get a basic introduction to visualization (see sub-section Visualization 0.1).
