Difference between revisions of "Meshing"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
| Line 30: | Line 30: | ||
* [https://wiki.openfoam.com/2D_flapping_wing_by_Michael_Alletto '''2D flapping wing'''] - In this tutorial an additional application of the overset methodology is illustrated. | * [https://wiki.openfoam.com/2D_flapping_wing_by_Michael_Alletto '''2D flapping wing'''] - In this tutorial an additional application of the overset methodology is illustrated. | ||
* [https://wiki.openfoam.com/Faucet_and_Sink_with_Overset_Mesh_by_Jozsef_Nagy#Faucet_and_Sink '''Faucet and Sink'''] - In this tutorial you will learn the overset functionality in a VOF simulation with an inlet on the overset mesh. | * [https://wiki.openfoam.com/Faucet_and_Sink_with_Overset_Mesh_by_Jozsef_Nagy#Faucet_and_Sink '''Faucet and Sink'''] - In this tutorial you will learn the overset functionality in a VOF simulation with an inlet on the overset mesh. | ||
| − | * [https://wiki.openfoam.com/OscillatingInletACMI2D_by_Marco_Zecchi An extension of oscillatingInletACMI2D tutorial to better understand how to work with ACMI] - In this tutorial you will learn more about ACMI. | + | * [https://wiki.openfoam.com/OscillatingInletACMI2D_by_Marco_Zecchi '''An extension of oscillatingInletACMI2D tutorial to better understand how to work with ACMI'''] - In this tutorial you will learn more about ACMI. |
'''Mesh dependence study''' | '''Mesh dependence study''' | ||
Latest revision as of 09:10, 29 November 2024
The saying goes "Who owns the mesh, owns the solution". With the help of these tutorials you will learn how to create meshes for arbitrary geometries in order to run your simulations.
Go back to Collection by topic.
Meshing
Overview
- A List of meshing tools that integrate with OpenFOAM.
Geometry
- Geometry creation - Here you will get a detailed introduction into two alternatives for the creation of geometries as inputs for a CFD project in OpenFOAM.
Meshing
- blockMesh - In the following tutorial(s) you will find an introduction into meshing with the blockMesh utility:
- Meshing with cfMesh - In this tutorial you will learn the basics of meshing with cfMesh.
- snappyHexMesh – Single region - Mesh a flange geometry and simulate heat transfer in it using scalarTransportFoam.
- snappyHexMesh – Multi region - In this tutorial a geometry with more than one region is meshed using snappyHexMesh and simulated using chtMultiRegionFoam.
Moving mesh
- Rotating Fan in Room - In this tutorial you will learn how to run a rotating mesh simulation.
- Sphere settling under the influence of gravity - In this tutorial you will learn about the simulations with overset meshes.
- Sphere settling under the influence of gravity with varying contact angle - In this tutorial you will learn about the simulations with overset meshes and different contact angles.
- 2D flapping wing - In this tutorial an additional application of the overset methodology is illustrated.
- Faucet and Sink - In this tutorial you will learn the overset functionality in a VOF simulation with an inlet on the overset mesh.
- An extension of oscillatingInletACMI2D tutorial to better understand how to work with ACMI - In this tutorial you will learn more about ACMI.
Mesh dependence study
- Transonic flow around a periodically pitching NACA0012 airfoil - In this tutorial you will learn about the transonic flow around a periodically pitching NACA0012 airfoil including an extensive grid dependence study
