Difference between revisions of "Collection by authors"
Jump to navigation
Jump to search
(137 intermediate revisions by 9 users not shown) | |||
Line 1: | Line 1: | ||
− | This is | + | This is a list of the contributions ordered '''alphabetically''' by the contributors. |
Go back to [https://wiki.openfoam.com/index.php?title=Tutorials Tutorials]. | Go back to [https://wiki.openfoam.com/index.php?title=Tutorials Tutorials]. | ||
+ | |||
+ | |||
+ | |||
+ | =Michael Alletto= | ||
+ | |||
+ | * [https://wiki.openfoam.com/Settling_Sphere_by_Michael_Alletto Settling sphere] | ||
+ | * [https://wiki.openfoam.com/Settling_Sphere_Contact_Angle_by_Michael_Alletto Settling Sphere Contact Angle] | ||
+ | * [https://wiki.openfoam.com/2D_flapping_wing_by_Michael_Alletto 2D flapping wing] | ||
+ | * [https://wiki.openfoam.com/Inline_oscillating_cylinder_by_Michael_Alletto Inline oscillating cylinder] | ||
+ | * [https://wiki.openfoam.com/NACA0012_by_Michael_Alletto Transonic flow around a periodically pitching NACA0012 airfoil] | ||
+ | * [https://wiki.openfoam.com/OneraM6_by_Michael_Alletto Transonic flow around the 3D Onera M6 wing at an angle of attack of 3.06°] | ||
+ | * [https://wiki.openfoam.com/1Dof_spring_mass_damper_system_by_Michael_Alletto One degree of freedom spring-mass-damper system without fluid forces] | ||
+ | * [https://wiki.openfoam.com/Vortex_induced_vibration_of_a_2D_cylinder_by_Michael_Alletto 2D oscillating elastically mounted cylinder under the influence of fluid forces] | ||
+ | * [https://wiki.openfoam.com/AMR_supersonic_sphere_Re300_Ma1dot2_by_Michael_Alletto AMR of the flow around a supersonic sphere at Re = 300 and Ma = 1.2] | ||
+ | * [https://wiki.openfoam.com/Bubble_growth_detachment_influence_BC_domain_size_by_Michael_Alletto Simulation of the bubble growth and detachment with interIsoFoam: Influence of the boundary conditions and domain size] | ||
+ | * [https://wiki.openfoam.com/Bubble_growth_detachment_influence_temporal_spacial_resolution_Michael_Alletto Simulation of the bubble growth and detachment with interIsoFoam: Influence of temporal and spacial resolution] | ||
+ | * [https://wiki.openfoam.com/Dynamic_stall_NACA0012_Michael_Alletto Dynamic stall simulation of an incompressible flow around a NACA0012 wing] | ||
+ | * [https://wiki.openfoam.com/Coupling_a_membrane_with_pretension_to_point_displacement_Michael_Alletto Coupling the motion of a membrane with pretension to point the displacement of the mesh] | ||
+ | * [https://wiki.openfoam.com/Coupling_a_simple_nonlinear_membrane_to_point_displacement_Michael_Alletto Coupling the motion of a simple non linear membrane model to point the displacement of the mesh] | ||
+ | * [https://wiki.openfoam.com/Lid_driven_cavity_with_a_flexible_bottom_surface_Michael_Alletto Lid driven cavity with a flexible bottom surface] | ||
+ | |||
+ | =Chandan Bose= | ||
+ | |||
+ | * [https://wiki.openfoam.com/YouTube_video_tutorials_by_Chandan_Bose YouTube video tutorials] | ||
=Isabelle Choquet and Håkan Nilsson= | =Isabelle Choquet and Håkan Nilsson= | ||
* [https://wiki.openfoam.com/Thermodynamic_class_by_Isabelle_Choquet ThermophysicalModels library] | * [https://wiki.openfoam.com/Thermodynamic_class_by_Isabelle_Choquet ThermophysicalModels library] | ||
+ | |||
+ | =Gerasimos Chourdakis= | ||
+ | |||
+ | * [https://wiki.openfoam.com/Coupling_with_preCICE_by_Gerasimos_Chourdakis Coupling with preCICE] | ||
=Luís Ferrás, Célio Fernandes and J.M. Nóbrega= | =Luís Ferrás, Célio Fernandes and J.M. Nóbrega= | ||
Line 13: | Line 41: | ||
* [https://wiki.openfoam.com/Postprocessing_by_Ferras,_Fernandes_and_Nobrega Postprocessing] | * [https://wiki.openfoam.com/Postprocessing_by_Ferras,_Fernandes_and_Nobrega Postprocessing] | ||
* [https://wiki.openfoam.com/Programming_by_Ferras,_Fernandes_and_Nobrega Programming] | * [https://wiki.openfoam.com/Programming_by_Ferras,_Fernandes_and_Nobrega Programming] | ||
+ | |||
+ | =Lionel Gamet= | ||
+ | |||
+ | * [https://wiki.openfoam.com/Hysing_benchmark_by_Lionel_Gamet Hysing benchmark] | ||
+ | * [https://wiki.openfoam.com/Bubble_rising_in_a_spiralling_path_in_a_large_tank_by_Lionel_Gamet#Running_the_case Bubble rising in a spiralling path in a large tank] | ||
+ | * [https://wiki.openfoam.com/The_stationary_droplet_by_Lionel_Gamet The stationary droplet] | ||
+ | |||
+ | =Bernhard Gschaider= | ||
+ | |||
+ | * [https://wiki.openfoam.com/PyFoam_and_swakFoam_by_Bernhard_Gschaider PyFoam and swakFoam] | ||
=Joel Guerrero= | =Joel Guerrero= | ||
− | * [https://wiki.openfoam.com/Theory_of_turbulence_modeling_by_Joel_Guerrero Crash introduction to turbulence | + | <!-- |
− | * [https://wiki.openfoam.com/Theory_by_Joel_Guerrero Crash introduction to the FVM] | + | * [https://wiki.openfoam.com/Theory_of_turbulence_modeling_by_Joel_Guerrero Advanced physics: Crash introduction to turbulence modeling] |
− | * [https://wiki.openfoam.com/ | + | * [https://wiki.openfoam.com/Theory_of_mphase Advanced physics: Crash introduction to multiphase flows] |
− | * [https://wiki.openfoam.com/ | + | * [https://wiki.openfoam.com/Theory_of_compressible Advanced physics: Crash introduction to compressible flows] |
− | * [https://wiki.openfoam.com/ | + | |
+ | * [https://wiki.openfoam.com/Theory_by_Joel_Guerrero Crash introduction to the FVM and numerical playground] | ||
+ | |||
+ | * [https://wiki.openfoam.com/Geometry_creation_by_Joel_Guerrero Solid modeling using open source tools] | ||
+ | * [https://wiki.openfoam.com/Meshing_in_OpenFOAM_by_Joel_Guerrero Meshing using OpenFOAM technology] | ||
+ | |||
+ | * [https://wiki.openfoam.com/Parallelization_by_Joel_Guerrero Running in parallel - Highlights] | ||
+ | * [https://wiki.openfoam.com/The_cloud_by_Joel_Guerrero Running on the cloud - Highlights] | ||
+ | |||
+ | * [https://wiki.openfoam.com/Visualization_by_Joel_Guerrero Scientific visualization with paraview] | ||
+ | |||
+ | * [https://wiki.openfoam.com/Programming1 Programming - Implementing boundary condtions using codeStream] | ||
+ | * [https://wiki.openfoam.com/Programming2 Programming - Field initialization using codeStream] | ||
+ | * [https://wiki.openfoam.com/Programming0 Programming - Programming in OpenFOAM - Building blocks] | ||
+ | * [https://wiki.openfoam.com/Programming3 Programming - Creating a basic solver from scratch] | ||
+ | * [https://wiki.openfoam.com/Programming4 Programming - Modifying applications - Adding a passive scalar to icoFoam] | ||
+ | * [https://wiki.openfoam.com/Programming5 Programming - Implementing boundary condtions using OpenFOAM API (high-level programming)] | ||
+ | |||
+ | * [https://wiki.openfoam.com/Tips_by_Joel_Guerrero Tips and tricks] | ||
* [https://wiki.openfoam.com/Ending_by_Joel_Guerrero Main takeaways] | * [https://wiki.openfoam.com/Ending_by_Joel_Guerrero Main takeaways] | ||
− | * [https://wiki.openfoam.com/ | + | --> |
− | * [https://wiki.openfoam.com/ | + | |
− | * [https://wiki.openfoam.com/ | + | * [https://figshare.com/articles/media/OpenFOAM_Introductory_Training/16783657 OpenFOAM Introductory Training] |
− | * [https://wiki.openfoam.com/ | + | * [https://figshare.com/articles/presentation/OpenFOAM_advanced_training_Turbulence_modeling_in_general_CFD_and_OpenFOAM_-_Theory_and_applications/19310162/1 Turbulence modeling in general CFD and OpenFOAM - Theory and applications] |
− | * [https://wiki.openfoam.com/ | + | * [https://figshare.com/articles/presentation/OpenFOAM_advanced_training_Multi-phase_flows_modeling_in_general_CFD_and_OpenFOAM_-_Theory_and_applications/19310483/1 Multi-phase flows modeling in general CFD and OpenFOAM - Theory and applications] |
− | * [https://wiki.openfoam.com/ | + | * [https://figshare.com/articles/presentation/OpenFOAM_advanced_training_Introduction_to_the_FVM_method_Standard_practices_in_general_CFD_with_applications_to_OpenFOAM/19308740/1 Introduction to the FVM method. Standard practices in general CFD with applications to OpenFOAM] |
− | * [https://wiki.openfoam.com/ | + | * [https://figshare.com/articles/presentation/OpenFOAM_advanced_training_Basic_solid_modeling_for_CFD_using_Onshape_and_mesh_generation_using_OpenFOAM_tools/19309760/1 Basic solid modeling for CFD using Onshape and mesh generation using OpenFOAM tools] |
− | * [https://wiki.openfoam.com/ | + | * [https://figshare.com/articles/presentation/OpenFOAM_advanced_training_Moving_meshes_rigid_body_motion_adaptive_mesh_refinement_and_overset_meshes/19310492/1 Moving meshes, rigid body motion, adaptive mesh refinement, and overset meshes] |
− | * [https://wiki.openfoam.com/ | + | |
− | * [https://wiki.openfoam.com/ | + | * [https://wiki.openfoam.com/Cavity_by_Joel_Guerrero Tutorial 1: The driven cavity revisited] |
+ | * [https://wiki.openfoam.com/Hagen_Poiseuille_by_Joel_Guerrero Tutorial 2: Hagen Poiseuille flow] | ||
+ | * [https://wiki.openfoam.com/Vortex_shedding_by_Joel_Guerrero_2D Tutorial 3: 2D Circular cylinder - Vortex shedding] | ||
+ | * [https://wiki.openfoam.com/Vortex_shedding_by_Joel_Guerrero_3D Tutorial 4: 3D Square cylinder - Vortex shedding and turbulence modeling ] | ||
+ | * [https://wiki.openfoam.com/Hairpin_by_Joel_Guerrero Tutorial 5: Hairpin vortices] | ||
+ | * [https://wiki.openfoam.com/Multiphase_modeling_%28VOF%29_by_Joel_Guerrero Tutorial 6: Multi-phase flows using the VOF method] | ||
+ | * [https://wiki.openfoam.com/Compressible_flows_by_Joel_Guerrero Tutorial 7: Supersonic flow past a wedge] | ||
+ | * [https://wiki.openfoam.com/Compressible_flows_by_Joel_Guerrero2 Tutorial 8: Supersonic flow past an expansion corner] | ||
+ | * [https://wiki.openfoam.com/Compressible_flows_by_Joel_Guerrero3 Tutorial 9: Sod's shock tube] | ||
+ | * [https://wiki.openfoam.com/drivaer_Joel_Guerrero3 Tutorial 10: Automotive simulation - DrivAer model validation] | ||
=Bahram Haddadi and Christian Jordan= | =Bahram Haddadi and Christian Jordan= | ||
Line 43: | Line 108: | ||
* [https://wiki.openfoam.com/Parallelization_by_Bahram_Haddadi Parallelization] | * [https://wiki.openfoam.com/Parallelization_by_Bahram_Haddadi Parallelization] | ||
* [https://wiki.openfoam.com/Reacting_flow_by_Bahram_Haddadi_and_colleagues Reacting flow] | * [https://wiki.openfoam.com/Reacting_flow_by_Bahram_Haddadi_and_colleagues Reacting flow] | ||
+ | * [https://wiki.openfoam.com/Sampling_by_Bahram_Haddadi_and_colleagues Sampling] | ||
+ | * [https://wiki.openfoam.com/SnappyHexMesh_%E2%80%93_Multi_region_by_Bahram_Haddadi_and_colleagues SnappyHexMesh – Multi region] | ||
+ | * [https://wiki.openfoam.com/SnappyHexMesh_%E2%80%93_Single_region_by_Bahram_Haddadi_and_colleagues SnappyHexMesh – Single region] | ||
+ | * [https://wiki.openfoam.com/Steady-state_turbulence_modeling_by_Bahram_Haddadi Steady-state turbulence modeling] | ||
* [https://wiki.openfoam.com/Tips_by_Bahram_Haddadi_and_colleagues Tips] | * [https://wiki.openfoam.com/Tips_by_Bahram_Haddadi_and_colleagues Tips] | ||
* [https://wiki.openfoam.com/T-junction_by_Bahram_Haddadi_and_colleagues T-junction] | * [https://wiki.openfoam.com/T-junction_by_Bahram_Haddadi_and_colleagues T-junction] | ||
− | |||
* [https://wiki.openfoam.com/Turbulence_modeling_by_Bahram_Haddadi Turbulence modeling] | * [https://wiki.openfoam.com/Turbulence_modeling_by_Bahram_Haddadi Turbulence modeling] | ||
Line 54: | Line 122: | ||
=Tobias Holzmann= | =Tobias Holzmann= | ||
+ | * [https://wiki.openfoam.com/Numerical_schemes_by_Tobias_Holzmann Numerical scheme analyzing] | ||
+ | * [https://wiki.openfoam.com/Suzanne_by_Tobias_Holzmann Drag coefficient of a monkey head - Suzanne] | ||
+ | * [https://wiki.openfoam.com/Simulation_project_of_an_exhaust_manifold_by_Tobias_Holzmann How To Build a complete OpenFOAM Project - Exhaust manifold ] | ||
+ | * [https://wiki.openfoam.com/Simulation_project_of_a_smoking_pipe_by_Tobias_Holzmann Creation of a complete OpenFOAM Project - The Rock Vapor Classic (Smoking Pipe)] | ||
+ | * [https://wiki.openfoam.com/Code_development_by_Tobias_Holzmann Code Development] | ||
* [https://wiki.openfoam.com/Tutorials_by_Tobias_Holzmann Case collection] | * [https://wiki.openfoam.com/Tutorials_by_Tobias_Holzmann Case collection] | ||
− | * [https://wiki.openfoam.com/ | + | * [https://wiki.openfoam.com/HumidityRhoThermo_by_Tobias_Holzmann The humidityRhoThermo Library] |
=Andras Horvath= | =Andras Horvath= | ||
Line 68: | Line 141: | ||
* [https://wiki.openfoam.com/Programming_by_Kenneth_Hoste_and_Hrvoje_Jasak Programming] | * [https://wiki.openfoam.com/Programming_by_Kenneth_Hoste_and_Hrvoje_Jasak Programming] | ||
− | = | + | =Luofeng Huang= |
− | * [https://wiki.openfoam.com/ | + | * [https://wiki.openfoam.com/UCL_OpenFOAM_Course_2019_by_Luofeng_Huang UCL OpenFOAM Course 2019] |
+ | * [https://wiki.openfoam.com/Proceedings:_the_3rd_UCL_OpenFOAM_Workshop_by_Luofeng_Huang Proceedings: the 3rd UCL OpenFOAM Workshop] | ||
− | = | + | =Komal Kedarnath G= |
− | * [https://wiki.openfoam.com/ | + | * [https://wiki.openfoam.com/Running_OpenFOAM_on_Android_by_Komal_Kedarnath Running OpenFOAM on Android] |
+ | |||
+ | =Victoria Korchagova, Matvey Kraposhin and Sergei Strijhak= | ||
+ | |||
+ | * [https://wiki.openfoam.com/Free_surface_flows_in_OpenFOAM_by_Victoria_Korchagova Free-surface flows] | ||
+ | * [https://wiki.openfoam.com/LibAcoustics_by_Sergei_Strijhak Acoustics models] | ||
* [https://wiki.openfoam.com/Compressible_flows_by_Sergei_Strijhak Compressible flows] | * [https://wiki.openfoam.com/Compressible_flows_by_Sergei_Strijhak Compressible flows] | ||
* [https://wiki.openfoam.com/Free_convection_by_Sergei_Strijhak Free convection] | * [https://wiki.openfoam.com/Free_convection_by_Sergei_Strijhak Free convection] | ||
* [https://wiki.openfoam.com/PitzDaily_tutorial_by_Sergei_Strijhak Rearward-Facing Step Flow] | * [https://wiki.openfoam.com/PitzDaily_tutorial_by_Sergei_Strijhak Rearward-Facing Step Flow] | ||
− | * [https://wiki.openfoam.com/ | + | |
+ | =Matvey Kraposhin and Ilia Marchevsky= | ||
+ | |||
+ | * [https://wiki.openfoam.com/Simple_FSI_by_Matvey_Kraposhin Simple fluid-structure interaction] | ||
+ | * [https://wiki.openfoam.com/Coupled_heat_transfer_in_gas_and_solid_by_Ilia_Marchevsky Coupled heat transfer in gas and solid] | ||
=Robert Lee= | =Robert Lee= | ||
Line 87: | Line 170: | ||
* [https://wiki.openfoam.com/Parallelization_by_Robert_Lee Parallelization] | * [https://wiki.openfoam.com/Parallelization_by_Robert_Lee Parallelization] | ||
* [https://wiki.openfoam.com/Programming_by_Robert_Lee Programming] | * [https://wiki.openfoam.com/Programming_by_Robert_Lee Programming] | ||
+ | |||
+ | =Nikola Majksner and Wouter Remmerie= | ||
+ | |||
+ | * [https://wiki.openfoam.com/Adaptive_Mesh_Refinement_by_Air_Shaper Adaptive Mesh Refinement] | ||
+ | |||
+ | =József Nagy= | ||
+ | |||
+ | * [https://wiki.openfoam.com/Installing_in_Windows_10_by_Jozsef_Nagy Installing OpenFOAM in Windows 10 and Ubuntu] | ||
+ | * [https://wiki.openfoam.com/Multiphase_(VOF)_Simulation_Project_by_Jozsef_Nagy Multiphase (VOF) Simulation Project] | ||
+ | * [https://wiki.openfoam.com/Rotating_Mesh_Simultion_Project_by_Jozsef_Nagy Rotating Fan in Room] | ||
+ | * [https://wiki.openfoam.com/Meshing_with_cfMesh_by_Jozsef_Nagy Meshing with cfMesh] | ||
+ | * [https://wiki.openfoam.com/Faucet_and_Sink_with_Overset_Mesh_by_Jozsef_Nagy#Faucet_and_Sink Faucet and Sink] | ||
=József Nagy, Bahram Haddadi and Christian Jordan= | =József Nagy, Bahram Haddadi and Christian Jordan= | ||
Line 104: | Line 199: | ||
=Håkan Nilsson= | =Håkan Nilsson= | ||
− | * [https://wiki.openfoam.com/ | + | * [https://wiki.openfoam.com/Basic_introduction_by_Hakan_Nilsson Basic introduction to OpenFOAM] |
− | * [https://wiki.openfoam.com/ | + | * [https://wiki.openfoam.com/Basics_of_C%2B%2B_by_Hakan_Nilsson Basics of C++] |
− | * [ | + | * [https://wiki.openfoam.com/Basic_programming_by_Hakan_Nilsson Basics of programming in OpenFOAM] |
− | * [https://wiki.openfoam.com/ | + | * [https://wiki.openfoam.com/Programming_by_Hakan_Nilsson Advanced programming in OpenFOAM] |
+ | * [https://wiki.openfoam.com/Course_by_Hakan_Nilsson Course of Håkan Nilsson with '''>150!''' tutorial cases] | ||
+ | |||
+ | =Franco Otaola= | ||
+ | |||
+ | * [https://wiki.openfoam.com/Creating_Setting_up_Windows_10_for_OF_use_by_Franco_Otaola Setting up Windows 10 for OF use] | ||
=Stefan Radl= | =Stefan Radl= | ||
− | * [https://wiki.openfoam.com/Basics_by_Stefan_Radl Basics] | + | [[File:Header_simSciTuts.png|500px|thumb|right|OpenFOAM tutorials from the "TU Graz SimSci" Series]] |
− | * [https://wiki.openfoam.com/ | + | |
− | * [https://wiki.openfoam.com/ | + | '''Main''' |
− | * [https://wiki.openfoam.com/Programming_by_Stefan_Radl | + | * [https://wiki.openfoam.com/Basics_by_Stefan_Radl Session 0: Basics and Introduction] |
− | * [https://wiki.openfoam.com/Visualization_by_Stefan_Radl | + | * [https://wiki.openfoam.com/SessionA_by_Stefan_Radl Session A: What can you do with OpenFOAM?] |
+ | * [https://wiki.openfoam.com/Session_B_by_Stefan_Radl Session B: Usage of OpenFOAM (includes DPMFoam and MPPICFoam)] | ||
+ | * [https://wiki.openfoam.com/Programming_by_Stefan_Radl Session C: Understand and Modify OpenFOAM] | ||
+ | * [https://wiki.openfoam.com/Integration_with_FreeCAD_by_Stefan_Radl Session D: Integration with FreeCAD] | ||
+ | * [https://wiki.openfoam.com/AdvancedCaseComplexCAD_by_Stefan_Radl Session E: Advanced Case Setup with Complex CAD] | ||
+ | * [https://wiki.openfoam.com/ViscousTimeStepLimitation_by_Stefan_Radl Session F: Introducing a Time Step limitation due to high viscosity] | ||
+ | |||
+ | '''Appendices''' | ||
+ | * [https://wiki.openfoam.com/Download_and_Others_by_Stefan_Radl Appendix A: Files & Other] | ||
+ | * [https://wiki.openfoam.com/Templates_by_Stefan_Radl Appendix B: Templates (e.g., for plotting)] | ||
+ | * [https://wiki.openfoam.com/Visualization_by_Stefan_Radl Appendix C: Paraview Details] | ||
+ | * [https://wiki.openfoam.com/BasicCaseStudies_by_Stefan_Radl Appendix D: external Case Studies] | ||
+ | * [https://wiki.openfoam.com/Debugging_by_Stefan_Radl Appendix E: Debuggers and Profiling] | ||
+ | * [https://wiki.openfoam.com/Win10OpenSUSEShell_by_Stefan_Radl Appendix F: OpenFOAM in Windows 10: The OpenSUSE Shell] | ||
=Henrik Rusche= | =Henrik Rusche= | ||
Line 121: | Line 234: | ||
* [https://wiki.openfoam.com/Programming_by_Henrik_Rusche Programming - Scalar Transport: Swirl Test] | * [https://wiki.openfoam.com/Programming_by_Henrik_Rusche Programming - Scalar Transport: Swirl Test] | ||
− | =Bruno Santos= | + | =Bruno Santos et al.= |
* [https://wiki.openfoam.com/Conjugate_heat_transfer_by_Bruno_Santos Conjugate heat transfer - planeWall2D] | * [https://wiki.openfoam.com/Conjugate_heat_transfer_by_Bruno_Santos Conjugate heat transfer - planeWall2D] | ||
Line 131: | Line 244: | ||
=Gavin Tabor= | =Gavin Tabor= | ||
− | * [https://wiki.openfoam.com/The_DrivAer_case_by_Gavin_Tabor | + | * [https://wiki.openfoam.com/The_DrivAer_case_by_Gavin_Tabor Action car case] |
* [https://wiki.openfoam.com/Programming_boundary_conditions_by_Gavin_Tabor Writing new boundary conditions] | * [https://wiki.openfoam.com/Programming_boundary_conditions_by_Gavin_Tabor Writing new boundary conditions] | ||
* [https://wiki.openfoam.com/Simulating_chocolate_by_Gavin_Tabor Simulating chocolate] | * [https://wiki.openfoam.com/Simulating_chocolate_by_Gavin_Tabor Simulating chocolate] | ||
+ | * [https://wiki.openfoam.com/Detailed_numerics_by_Gavin_Tabor A detailed look at fvSchemes and fvSolution] | ||
=Alexander Vakhrushev= | =Alexander Vakhrushev= | ||
Line 140: | Line 254: | ||
* [https://wiki.openfoam.com/Multiphase_flows_in_iron_casting_by_Alexander_Vakhrushev Multiphase flows in iron casting] | * [https://wiki.openfoam.com/Multiphase_flows_in_iron_casting_by_Alexander_Vakhrushev Multiphase flows in iron casting] | ||
* [https://wiki.openfoam.com/Programming_by_Alexander_Vakhrushev Programming] | * [https://wiki.openfoam.com/Programming_by_Alexander_Vakhrushev Programming] | ||
+ | |||
+ | =Divyesh Variya (DD Fluids)= | ||
+ | |||
+ | [[File:DDFluids_Logo.png|150px|thumb|OpenFOAM Video tutorials by Divyesh Variya (DD Fluids)]] | ||
+ | |||
+ | * [https://wiki.openfoam.com/Overview_&_Installation_by_Divyesh_Variya_(DD_Fluids) Overview & Installation] | ||
+ | * [https://wiki.openfoam.com/First_OpenFOAM_Simulation_by_Divyesh_Variya_(DD_Fluids) First OpenFOAM Simulation] | ||
+ | * [https://wiki.openfoam.com/Meshing_in_OpenFOAM_by_Divyesh_Variya_(DD_Fluids) Meshing in OpenFOAM] | ||
+ | * [https://wiki.openfoam.com/Boundary_Conditions_in_OpenFOAM_by_Divyesh_Variya_(DD_Fluids) Boundary Conditions in OpenFOAM] | ||
+ | * [https://wiki.openfoam.com/Solvers_in_OpenFOAM_by_Divyesh_Variya_(DD_Fluids) Solvers in OpenFOAM] | ||
+ | * [https://wiki.openfoam.com/Post-Processing_in_ParaView_&_OpenFOAM_by_Divyesh_Variya_(DD_Fluids) Post-Processing in ParaView & OpenFOAM] |
Latest revision as of 12:45, 18 October 2023
This is a list of the contributions ordered alphabetically by the contributors.
Go back to Tutorials.
Contents
- 1 Michael Alletto
- 2 Chandan Bose
- 3 Isabelle Choquet and Håkan Nilsson
- 4 Gerasimos Chourdakis
- 5 Luís Ferrás, Célio Fernandes and J.M. Nóbrega
- 6 Lionel Gamet
- 7 Bernhard Gschaider
- 8 Joel Guerrero
- 9 Bahram Haddadi and Christian Jordan
- 10 Gerhard Holzinger
- 11 Tobias Holzmann
- 12 Andras Horvath
- 13 Kenneth Hoste and Hrvoje Jasak
- 14 Luofeng Huang
- 15 Komal Kedarnath G
- 16 Victoria Korchagova, Matvey Kraposhin and Sergei Strijhak
- 17 Matvey Kraposhin and Ilia Marchevsky
- 18 Robert Lee
- 19 Nikola Majksner and Wouter Remmerie
- 20 József Nagy
- 21 József Nagy, Bahram Haddadi and Christian Jordan
- 22 Håkan Nilsson
- 23 Franco Otaola
- 24 Stefan Radl
- 25 Henrik Rusche
- 26 Bruno Santos et al.
- 27 Bruno Santos, Nelson Marques and Manoel Silvino Araújo
- 28 Gavin Tabor
- 29 Alexander Vakhrushev
- 30 Divyesh Variya (DD Fluids)
Michael Alletto
- Settling sphere
- Settling Sphere Contact Angle
- 2D flapping wing
- Inline oscillating cylinder
- Transonic flow around a periodically pitching NACA0012 airfoil
- Transonic flow around the 3D Onera M6 wing at an angle of attack of 3.06°
- One degree of freedom spring-mass-damper system without fluid forces
- 2D oscillating elastically mounted cylinder under the influence of fluid forces
- AMR of the flow around a supersonic sphere at Re = 300 and Ma = 1.2
- Simulation of the bubble growth and detachment with interIsoFoam: Influence of the boundary conditions and domain size
- Simulation of the bubble growth and detachment with interIsoFoam: Influence of temporal and spacial resolution
- Dynamic stall simulation of an incompressible flow around a NACA0012 wing
- Coupling the motion of a membrane with pretension to point the displacement of the mesh
- Coupling the motion of a simple non linear membrane model to point the displacement of the mesh
- Lid driven cavity with a flexible bottom surface
Chandan Bose
Isabelle Choquet and Håkan Nilsson
Gerasimos Chourdakis
Luís Ferrás, Célio Fernandes and J.M. Nóbrega
Lionel Gamet
Bernhard Gschaider
Joel Guerrero
- OpenFOAM Introductory Training
- Turbulence modeling in general CFD and OpenFOAM - Theory and applications
- Multi-phase flows modeling in general CFD and OpenFOAM - Theory and applications
- Introduction to the FVM method. Standard practices in general CFD with applications to OpenFOAM
- Basic solid modeling for CFD using Onshape and mesh generation using OpenFOAM tools
- Moving meshes, rigid body motion, adaptive mesh refinement, and overset meshes
- Tutorial 1: The driven cavity revisited
- Tutorial 2: Hagen Poiseuille flow
- Tutorial 3: 2D Circular cylinder - Vortex shedding
- Tutorial 4: 3D Square cylinder - Vortex shedding and turbulence modeling
- Tutorial 5: Hairpin vortices
- Tutorial 6: Multi-phase flows using the VOF method
- Tutorial 7: Supersonic flow past a wedge
- Tutorial 8: Supersonic flow past an expansion corner
- Tutorial 9: Sod's shock tube
- Tutorial 10: Automotive simulation - DrivAer model validation
Bahram Haddadi and Christian Jordan
- BlockMesh
- Discretization
- First Case
- First simulation
- Grid Convergence
- Multiphase (VOF)
- Parallelization
- Reacting flow
- Sampling
- SnappyHexMesh – Multi region
- SnappyHexMesh – Single region
- Steady-state turbulence modeling
- Tips
- T-junction
- Turbulence modeling
Gerhard Holzinger
Tobias Holzmann
- Numerical scheme analyzing
- Drag coefficient of a monkey head - Suzanne
- How To Build a complete OpenFOAM Project - Exhaust manifold
- Creation of a complete OpenFOAM Project - The Rock Vapor Classic (Smoking Pipe)
- Code Development
- Case collection
- The humidityRhoThermo Library
Andras Horvath
Kenneth Hoste and Hrvoje Jasak
- Finite_Volume_Discretization
- Introduction to OpenFOAM: A User View
- Multi-Phase and Free Surface Flows
- Programming
Luofeng Huang
Komal Kedarnath G
Victoria Korchagova, Matvey Kraposhin and Sergei Strijhak
Matvey Kraposhin and Ilia Marchevsky
Robert Lee
Nikola Majksner and Wouter Remmerie
József Nagy
- Installing OpenFOAM in Windows 10 and Ubuntu
- Multiphase (VOF) Simulation Project
- Rotating Fan in Room
- Meshing with cfMesh
- Faucet and Sink
József Nagy, Bahram Haddadi and Christian Jordan
- blockMesh
- Discretization
- First simulation
- Grid convergence
- Installing
- Multiphase modeling (VOF)
- Parallelization
- Running your first case
- Stationary turbulence modelling (RAS)
- Transient turbulence modelling (RAS,LES)
- Transport equation
Håkan Nilsson
- Basic introduction to OpenFOAM
- Basics of C++
- Basics of programming in OpenFOAM
- Advanced programming in OpenFOAM
- Course of Håkan Nilsson with >150! tutorial cases
Franco Otaola
Stefan Radl
Main
- Session 0: Basics and Introduction
- Session A: What can you do with OpenFOAM?
- Session B: Usage of OpenFOAM (includes DPMFoam and MPPICFoam)
- Session C: Understand and Modify OpenFOAM
- Session D: Integration with FreeCAD
- Session E: Advanced Case Setup with Complex CAD
- Session F: Introducing a Time Step limitation due to high viscosity
Appendices
- Appendix A: Files & Other
- Appendix B: Templates (e.g., for plotting)
- Appendix C: Paraview Details
- Appendix D: external Case Studies
- Appendix E: Debuggers and Profiling
- Appendix F: OpenFOAM in Windows 10: The OpenSUSE Shell
Henrik Rusche
Bruno Santos et al.
Bruno Santos, Nelson Marques and Manoel Silvino Araújo
Gavin Tabor
- Action car case
- Writing new boundary conditions
- Simulating chocolate
- A detailed look at fvSchemes and fvSolution